DENON Service Bulletin OST-F1124-1 free download

File name Service Bulletin OST-F1124-1.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1124-1 Date: January 20, 2010 _____________________________________________________________ Model: DVD-2930CI Subject: Firmware update. Symptom: (1) Sound interrupts between tracks with specific "DVD-AUDIO- DISC". (2) When the units power is turned OFF and ON and "setting of HDMI" is set to other than "HDMI OFF", setting of "DNR" is initialized to "0". (Even if OSD shows "+3" etc. DNR is in fact set to "0".) (3) If the user changes M1 ... M5 in the picture adjust menu the NOISE REDUCTION (+1 ... +3) setting - the player "forgets" this setting when it is switched off. That is - when switching it on again the menu still shows that M1 ... M5 is active and NOISE REDUCTION setting is displayed to be on the adjusted level (+1 ... +3) - but it is NOT (actual noise reduction setting is 0) (4) If the player connected to specified HDMI-equipment (EDID is more than 3 block) during "setting of HDMI" is set to other than "HDMI OFF", audio signal may be not output even if video the signal is output. (5) When the resolution is changed from 480i to 480p or changed from VGA to XGA under following condition, HDMI connect between DVD-2930(CI) to AV amplifier becomes "Unlock". [Condition] *HDMI setting is set to "MULTI (NORMAL)" or "MULTI (LPCM) ". *The DVD player connects with AV amplifier. *The DVD player plays "96kHz 5.1ch" of DVD-AUDIO. (6) When a "96kHz, 5.1ch DVD-AUDIO" disc is played after playing a "96/24 (5.1ch) DTS signal of DVD-AUDIO" under following condition, HDMI connect between DVD-2930 (CI) to AVR-5805 becomes "Unlock". [Condition] *HDMI setting is set to "MULTI (NORMAL) ". *The player connects with AVR-5805. (7) 5.1ch Analog audio is not down-mixed and only audio signal of FL/FR is outputted under following condition. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. [Condition] *HDMI setting is set to "MULTI (NORMAL)" or "MULTI (LPCM) ". *The player connects with HDMI monitor which has 2ch audio output. (8) When playing an SACD disc that has more than 100 minutes of total recorded time, "A0" is indicated to "time" in the OSD. (9) When